Chuck Jaws and Accessories - Woodturning Tools and Timber, Woodturner Accessories, Woodcarver Supplies, Woodturning Equipment

Home » Chucks and Accessories » Chuck Jaws and Accessories


	DOVETAIL JAWS VM100 v00642		$69.95
	Designed for mounting bowls by expanding into recess. Suits VM90/100 chucks		Out of Stock


	POPS SHED 10 FLAT JAWS		$54.95
	These jaws will suit our own Pop's Shed Chucks and the Vicmarc Vm90/100 Chucks


	POPS SHED 25MM PIN JAWS		$39.95
	Pin Jaws - 25mm to suit Pop's Shed Chuck		Out of Stock


	Pop's Shed Dovetail Jaws		$34.95
	Pop's Shed Dovetail Jaws fit the Vm90/100 or own chuck, the largest diameter they can clamp down onto is 68mm and the smallest is 32mm, externally it's 80mm and 44mm, the outside of the jaws feature a dovetail angle for expandi...


	POPS SHED EXTENDED DOVETAIL JAWS		$39.95
	Extended dovetail jaws for the Pop's Shed 4 Jaw Chuck


	POPS SHED FACE RING		$19.95
	The 70mm Face Plate Ring is best suited to the Pop's Shed or the VM90/100 Standard Jaw used in expansion mode.


	Pop's Shed Round Jaws		$24.95
	These jaws will fit either a VM90/100 or our own chuck, the largest diameter they can clamp down onto is 68mm and the smallest is 32mm, externally (expanding out into a mortice) it's 80mm and 44mm, the jaws are serrated to better hold the blank.


	POPS SHED STEP JAWS		$28.95
	Step Jaws for the Pop's Shed 4 Jaw Chuck


	VICMARC 25MM PIN JAWS VM90/100 V00650		$65.00
	25mm Pin Jaws are used for expansion into small recesses Suits VM90/100 chucks		Out of Stock


	VICMARC 55MM SHARK JAWS VM90/100 V00654		$69.00
	SHARK JAWS have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and faster than traditional jaws used to turn long workpie...


	VICMARC 74MM SHARK JAWS VM90/100 V00655		$89.95
	SHARK JAWS have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and faster than traditional jaws used to turn long workpie...


	vicmarc 88mm shark jaws VM90/100		$99.00
	SHARK JAWS have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and faster than traditional jaws used to turn long workpie...


	VICMARC BOWL JAWS 220MM VM 90/100		$125.00
	Adjustable jaws to re-chuck bowls from finishing bottom or light clean up work on foot of bowl. Suits VM90/100 chucks		Out of Stock


	VICMARC BOWL JAWS 285MM VM 120/140		$129.00
	The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom, or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internally or externally, ...


	VICMARC BOWL JAWS 285MM VM 90/100		$129.00
	Adjustable jaws to re-chuck bowls from finishing bottom or light clean up work on foot of bowl. Suits VM90/100 chucks		Out of Stock


	VICMARC BOWL JAWS 385MM VM 120/150		$135.00
	The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom, or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internally or externally, ...


	VICMARC BOWL JAWS 385MM VM 90/100		$135.00
	Adjustable jaws to re-chuck bowls from finishing bottom or light clean up work on foot of bowl. Suits VM90/100 chucks		Out of Stock


	VICMARC BOWL JAWS VM120/140 485MM		$155.00
	The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom, or do light clean-up work on the foot of the bowl. To mount the bowl, the bowl is reversed and held by the rim, either internally or externally, ...


	VICMARC DOVETAIL 2 STE VM90/100 V00644		$65.00
	Designed for mounting bowls by expanding into a recess or clamping onto a spigot. The sizes indicated on the drawing are when the jaws are on a perfect circle. VM90 and VM100 chucks provide approx 38mm of expansion beyond these specified s...


	VICMARC LONG NOSE JAW VM90/100 V00647		$65.00
	Vicmarc Long Nose Jaws allows better access between chuck body and the rear of the workpiece Suits VM90/100 Chucks


	Vicmarc pen blank jaws V00659		$42.95
	Pen Blank Jaw set comes as a set of 2 and are designed to clamp pen blank squares for drilling as shown below. These Jaws can clamp from 10mm square blanks up to 48mm square blanks.		Out of Stock


	VICMARC PIN JAWS 35MM FOR VM100 v00651		$65.00
	25mm Pin Jaws are used for such items as pepper grinders or kaleidoscopes Suits VM90/100 chucks


	VICMARC SHARK JAWS 48MM VM90/100 V00653		$65.00
	SHARK JAWS have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and faster than traditional jaws used to turn long workpie...


	VICMARC STEP JAW VM90/100 V00658		$65.00
	These jaws hold a range of spigot sizes with minimum jaw movement and without having to change jaws. Suits VM90/100 chucks

Privacy | Terms & Conditions | Site Map

Copyright © Pop's Shed 2020 All Rights Reserved.
All prices listed on this web site are in Australian Dollars and include GST.

Website design, development and hosting provided by You Solutions.

Find us on Facebook

Follow us on Twitter